banner
blog
home blog

blog

  • Tips For Choosing the Right Agricultural Irrigation Pump
    • Nov , 06 2020
    Tips For Choosing the Right Agricultural Irrigation Pump

    The right pump is a critical part of today’s agricultural irrigation systems. Without them, these systems could not function efficiently and lead to lost money, water, and crops. There are pumps for many different types of applications. Some of the applications require pumps made a specific way, with specific materials. Many irrigation systems are pressurized and therefore need a pump. Because the...

  • operation suggestion for the tank sprayer
    • Jul , 17 2020
    operation suggestion for the tank sprayer

    1. The sprayer is recommended for use in spraying agricultural pesticides, water and other non-flammable liquids. Improper use may cause damage to the sprayer and user. 2. Do not use flammable or corrosive chemicals in the tank sprayer. Contact factory or agent for suggestions about any uncertain chemicals. 3. Wear protective clothing, eye protection, and chemical resistant gloves when filling, us...

  • how to reassembly pump head to motor
    • Jul , 17 2020
    how to  reassembly pump head to motor

    Reassembly Pump head(3)to Motor(4). 1. Assemble the pump head (3)to motor(4)aligning screws tabs. 2. Install screw(2)and tighten to 15 inch ounces of torque. 3. Reconnect wires(5)to pressures switch.Wires can be connected to either terminal of the pressure switch. 4. Install the pressure switch cover with screw(1). 5. Reconnect pump to liquid source. 6. Reconnect pump to power source. 7. Allow pum...

  • how to Disassemble pump head
    • Jul , 02 2020
    how to Disassemble pump head

    Disassemble pump head l Take precaution to prevent injury due to chemical contact during maintenance. l Flush Pump with water or neutralizing agent before servicing if the pump has l been used to trans port chemicals. l Disconnect the power to the pump motor. l Remove the pressure switch cover by removing the single Screw(1)from l pressure switch and remove ...

  • Troubleshooting on pumps
    • Jul , 02 2020
    Troubleshooting on pumps

    Troubleshooting on pumps   These tips will help you to maintain the pumps quickly   Failure to Prime-Motor operates,but no pump discharge l Restricted intake or discharge line.Open all line valves. check for“Jammed” check valves, and clean clogged lines. l Air leak intake line. l Punctured pump diaphragm. l Defective pump check valve. l C...

  • black-lager beer style guide
    • Jun , 03 2020
    black-lager beer style guide

    black-lager beer style guide Color: Very dark brown to black ABV: 4%-6% Commercial Examples: Spoetzl Bohemian Black Lager, Saranac Black Forest, Sam Adams Black Lager You may look at a black lager in a pint glass and shout “stout!” or “porter!” And that’s a fair mistake, considering you can only tell so much from looking at a beer. But what differentiates a Black Lager from other dark beers, espec...

  • craft beer-India Pale Ale (IPA) Beer Guide
    • May , 12 2020
    craft beer-India Pale Ale (IPA) Beer Guide

    IPA:India Pale Ale Color: Pale gold to red, copper ABV: 6%-7.5% Commercial Examples: Lagunitas IPA, Russian River Brewing Company Blind Pig IPA, Dogfish Head 60 Minute IPA The most beloved acronym in all of craft beer. (Okay, may be ABV and IBU have some stake in the game, too.) Suffice to say, whether you’re a fan or not, you’ve heard of IPA, and maybe you’re wondering what all the fuss is about....

  • The differences between refined beer and industrial beer
    • May , 12 2020
    The differences between refined beer and industrial beer

    The differences between refined beer and industrial beer Refined beer Industrial beer Materials Water,malt,hops,yeast water,rice,amilum,malt,hops,yeast,other additives Additives NO Kinds of additives Fermentation days Max to 2 month 7 days Brewing Mode Ale, raga,nature Only raga Production Capacity Little but high quality High productivity Color Pale ye...

  • FAQ of diaphragm pump
    • Jan , 15 2020
    FAQ of diaphragm pump

    How do valves work in a pump? Answer: The valves work in conjunction with the main diaphragm and piston assembly. These together operate with an upward and downward movement creating a vacuum to pull and push fluid into and out of the pump. The main diaphragm is located in the lower housing and is assembled to the drive assembly by pistons. What do the following abbreviations or word mean? GPM: Ga...

    a total of

    9

    pages
Send A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

*
*
*

copyright © 2024 FUAN BIDIBAO ELECTRICAL APPLIANCE CO., LTD.all rights reserved. powered by dyyseo.com

ipv6 network supported

ipv6 network supported

top
FUAN BIDIBAO ELECTRICAL APPLIANCE CO., LTD

Send A Message

Send A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #